HEIDENHAIN IK 5394-3D - Manual (Page 483)

6 - 33
Quadra-Chek ® 5000
NOTE
A more detailed discussion of the worm tool is provided in
Chapter 3: Probes.
When the scan-limit is enabled, the limit boundary can be configured to pre-
vent scanning within a specified number of pixels from the edge of the field of
view.
Limiting worm tool scanning to the center of the field of view eliminates the
effects of lens-edge aberrations.
Enter the desired boundary distance into the Max distance from edge... field.
Specifying pattern file names
Whenever the pattern tool is taught a new pattern, it can be saved automatically
in the Parts folder using a default filename, or can be saved in another folder
using a user-specified filename.
The default file naming convention is:
Part name_Pattern (n).5pt
Where n is incremented for each new file.
Check the Prompt for pat-
tern file name... box to
specify a pattern file name
and storage location whenever a pattern is taught to the pattern tool.
Scanning prevented 30 pixels from edge of field of view Scanning prevented 75 pixels from edge of field of view