HEIDENHAIN iTNC 530 (34049x-08) ISO programming - Manual (Page 561)

HEIDENHAIN iTNC 530 561
1
7.3 Ent
er
ing code numbers
17.3 Entering code numbers
Application
The TNC requires a code number for the following functions:
In addition, you can use the keyword version to create a file containing
all current software numbers of your control:
 Enter the keyword version and confirm with the ENT key
 The TNC displays all current software numbers on the screen
 To terminate the version overview, press the END key
Copying sample files
Sample files for various file types (pallet files, freely definable tables,
cutting-data tables, etc.) are stored in the TNC. To make the sample
files available on the TNC partition, proceed as follows:
 Enter the code number 123 and confirm your entry with the ENT
key: This opens the user parameters
 Press the MOD key for the TNC to show various pieces of
information
 Press the "UPDATE DATA" soft key. The TNC switches to the menu
for software updates
 Press the COPY SAMPLE FILES soft key for the TNC to copy all
available sample files to the TNC partition. Keep in mind that the
TNC overwrites samples files (e.g. cutting-data tables) you have
already edited
 Press the END key twice to return to the initial screen
Function Code number
Select the user parameters and copy the
sample files
123
Configure an Ethernet card (not iTNC 530
with Windows XP)
NET123
Enable special functions for Q parameter
programming
555343