HEIDENHAIN iTNC 530 (34049x-08) ISO programming - Manual (Page 412)

412 Programming: Multiple axis machining
12.2 The PLANE function: Tilting the w
o
rk
ing plane (sof
tw
ar
e option 1)
Resetting the PLANE function
 Show the soft-key row with special functions
 Select special TNC functions: Press the SPECIAL TNC
FUNCT. soft key
 Select the PLANE function: Press the TILT
MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row
 Select the Reset function. This internally resets the
PLANE
function, but does not change the current axis
positions
 Specify whether the TNC should automatically move
the rotary axes to the default setting (MOVE or TURN) or
not (STAY) (see "Automatic positioning:
MOVE/TURN/STAY (entry is mandatory)" on page
426).
 Terminate the entry: Press the END key
Example: NC block
25 PLANE RESET MOVE SET-UP50 F1000
The PLANE RESET function resets the current PLANE
function—or an active cycle G80—completely (angles = 0
and function is inactive). It does not need to be defined
more than once.