HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 493)

Machine-specific user parameters 21.1
21
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
493
Parameter settings
DisplaySettings
Display step for individual axes
List of all available axes
Display step for position display in mm or degrees
0.1
0.05
0.01
0.005
0.001
0.0005
0.0001
0.00005 (display step software option)
0.00001 (display step software option)
Display step for position display in inches
0.005
0.001
0.0005
0.0001
0.00005 (display step software option)
0.00001 (display step software option)
DisplaySettings
Definition of unit of measure valid for the display
metric: Use metric system
inch: Use inch system
DisplaySettings
Format of NC programs and display of cycles
Program input in HEIDENHAIN conversational or in ISO format
HEIDENHAIN: Program input in Positioning with MDI mode of operation in conversational
format
ISO: Program input in Positioning with MDI mode of operation in ISO format
Display of cycles
TNC_STD: Display cycles with comment texts
TNC_PARAM: Display cycles without comment texts