HEIDENHAIN TNC 128 (77184x-02) User Manual
Page 443
FACE MILLING (Cycle 233)
17.4
17
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
443
2nd set-up clearance Q204 (incremental):
Coordinate in the spindle axis at which no collision
between tool and workpiece (fixtures) can occur.
Input range 0 to 99999.9999;
1st limit Q347:Select the workpiece side on which
the level surface is limited by a side wall. Depending
on the position of the side wall, the TNC limits the
machining of the level surface to the respective
coordinate of the starting point or to the side
length: :
Input
0
: No limit
Input
-1
: Limit in the negative reference axis
Input
+1
: Limit in the positive reference axis
Input
-2
: Limit in the negative minor axis
Input
+2
: Limit in the positive minor axis
2nd limit Q348: See parameter 1st limit Q347
3rd limit Q349: See parameter 1st limit Q347
Finishing allowance for side Q368 (incremental):
Finishing allowance in the working plane. Input
range 0 to 99999.9999 Input range 0 to 99999.9999
Infeed for finishing Q338 (incremental): Infeed per
cut. Q338=0: Finishing in one infeed. Input range 0
to 99999.9999