HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 156)

Programming: Tools
5.2 Tool data
5
156
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
Opening any other tool table
Select the Programming mode of operation
Call the file manager
Select a file or enter a new file name. Conclude
your entry with the
ENT key or the SELECT soft
key
When you have opened the tool table, you can edit the tool data
by moving the cursor to the desired position in the table with the
arrow keys or the soft keys. You can overwrite the stored values, or
enter new values at any position. Additional functions are illustrated
in the table below.