HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 135)

Error messages 4.6
4
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
135
Overview of the keys and soft keys for viewing the logs
Function Soft key/Keys
Go to beginning of keystroke log
Go to end of keystroke log
Current keystroke log
Previous keystroke log
Up/down one line
Return to main menu
Informational texts
After a faulty operation, such as pressing a key without function
or entering a value outside of the valid range, the TNC displays a
(green) text in the header, informing you that the operation was not
correct. The TNC clears this informational text upon the next valid
input.
Saving service files
If necessary, you can save the "Current status of the TNC," and
make it available to a service technician for evaluation. A group of
service files is saved (error and keystroke logs, as well as other
files that contain information about the current status of the
machine and the machining operation).
If you repeat the "Save service files" function with the same
file name, the previously saved group of service data files is
overwritten. To avoid this, use another file name when you repeat
the function.
Saving service files
Open the error window.
Press the
LOG FILES soft key.
Press the
Save service files soft key: The TNC
opens a pop-up window in which you can enter a
name for the service file.
Save the service files: Press the OK soft key.