HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 363)

Ethernet interface 14.11
14
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
363
Press the
Configuration button to open the Configuration
menu:
Setting Meaning
Status Active interface: Connection status of
the selected Ethernet interface
Name: Name of the interface you are
currently configuring
Plug connection: Number of the plug
connection of this interface on the logic
unit of the control
Profile
Here you can create or select a profile in
which all settings shown in this window are
stored. HEIDENHAIN provides two standard
profiles:
DHCP-LAN: Settings for the standard
TNC Ethernet interface, should work in a
standard company network
MachineNet: Settings for the second,
optional Ethernet interface; for
configuration of the machine network
Press the corresponding buttons to save,
load and delete profiles
IP address Automatically procure IP address: The
TNC is to procure the IP address from the
DHCP server
Manually set IP address: Manually define
the IP address and subnet mask. Input:
Four numerical values separated by
points, in each field, e.g.
160.1.180.20
and
255.255.0.0
Domain Name
Server (DNS)
Automatically procure DNS: The TNC is
to automatically procure the IP address of
the domain name server
Manually configure DNS: Manually enter
the IP addresses of the servers and the
domain name
Default
gateway
Automatically procure default GW:
The TNC is to automatically procure the
default gateway
Manually configure default GW:
Manually enter the IP addresses of the
default gateway
Apply the changes with the OK button, or discard them with the
Cancel button