beautypg.com

Defining a cycle using soft keys, Defining a cycle using the goto function, Example nc blocks – HEIDENHAIN TNC 128 (77184x-02) User Manual

Page 375: Working with fixed cycles 15.3

background image

Working with fixed cycles 15.3

15

TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014

375

Defining a cycle using soft keys

The soft-key row shows the available groups of
cycles

Press the soft key for the desired group of cycles,
for example DRILLING for the drilling cycles

Select the cycle, e.g. DRILLING. The TNC initiates
the programming dialog and asks for all required
input values. At the same time a graphic of the
input parameters is displayed in the right screen
window.

Enter all parameters requested by the TNC and
conclude each entry with the

ENT key

The TNC ends the dialog when all required data
has been entered

Defining a cycle using the GOTO function

The soft-key row shows the available groups of
cycles

The TNC shows an overview of cycles in a pop-up
window

Choose the desired cycle with the arrow keys, or

Enter the cycle number and confirm it with the
ENT key. The TNC then initiates the cycle dialog as
described above

Example NC blocks

7 CYCL DEF 200 DRILLING

Q200=2

;SET-UP CLEARANCE

Q201=3

;DEPTH

Q206=150

;FEED RATE FOR PLNGNG

Q202=5

;PLUNGING DEPTH

Q211=0

;DWELL TIME AT TOP

Q203=+0

;SURFACE COORDINATE

Q204=50

;2ND SET-UP CLEARANCE

Q211=0.25

;DWELL TIME AT BOTTOM