HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 423)

RIGID TAPPING without a floating tap holder (Cycle 207) 16.12
16
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
423
Cycle parameters
Set-up clearance Q200 (incremental): Distance
between tool tip and workpiece surface. Input range
0 to 99999.9999
Thread depth Q201 (incremental): Distance
between workpiece surface and root of thread.
Input range -99999.9999 to 99999.9999
Thread pitch Q239: Pitch of the thread. The
algebraic sign differentiates between right-hand and
left-hand threads:
+ = right-hand thread
– = left-hand thread.
Input range -99.9999 to 99.9999
Coordinate of workpiece surface Q203 (absolute):
Coordinate of the workpiece surface. Input
range -99999.9999 to 99999.9999 Input range
-99999.9999 to 99999.9999
2nd set-up clearance Q204 (incremental):
Coordinate in the spindle axis at which no collision
between tool and workpiece (fixtures) can occur.
Input range 0 to 99999.9999 Input range 0 to
99999.9999
NC blocks
26 CYCL DEF 207 RIGID TAPPING NEW
Q200=2 ;SET-UP CLEARANCE
Q201=-20 ;DEPTH
Q239=+1 ;THREAD PITCH
Q203=+25 ;SURFACE COORDINATE
Q204=50 ;2ND SET-UP
CLEARANCE
Retracting after a program interruption
If you interrupt program run during thread cutting with the machine
stop button, the TNC will display the
MANUAL OPERATION soft key.
If you press
MANUAL OPERATION, you can retract the tool under
program control. Simply press the positive axis direction button of
the active spindle axis.