beautypg.com

Capture actual position, Tool movements 6.2 – HEIDENHAIN TNC 128 (77184x-02) User Manual

Page 171

background image

Tool movements

6.2

6

TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014

171

Capture actual position

You can also generate a positioning block by using the

actual-

position-capture key:

In the

Manual Operation mode, move the tool to the position

you want to capture

Select the

Programming mode of operation

Select the program block after which you want to insert the
block

Press the

actual-position-capture key for the

TNC to generate an block

Select the desired axis, e.g. by pressing the

ACTL.

POS. X soft key: The TNC adopts the current
position and ends the dialog

See also other documents in the category HEIDENHAIN Equipment: