H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 64)

49
Type the username and password, and then click Login. The iMC homepage appears, as shown in Figure
19 .
Figure 19 iMC homepage
Log in to the iMC and configure SNMP settings for the iMC to find the SecBlade card. After the SecBlade
card is found, you can manage and maintain the SecBlade card through the iMC. For example, query
SecBlade card information or configure SecBlade card parameters.
The SNMP settings on the iMC must be the same as those configured on the SecBlade card. If not, the
SecBlade card cannot be found or managed by the iMC. See the iMC manuals for more information.
Click Help in the upper right corner of each configuration page to get help information.