H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 192)

177
Configuration System time configured Example
[1], 2, 3 and 1 or [1],
3, 2 and 1
If “date-time” is not in the
daylight saving time range,
the system time configured is
“date-time”.
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 1:00 2007/1/1
System time configured: 01:00:00 zone-time Mon
01/01/2007
“date-time” is in the daylight
saving time range:
If the value of
“date-time”-“summer-offset” is
not in the summer-time range,
the system time configured is
“date-time”-“summer-offset”;
If the value of
“date-time”-“summer-offset” is
in the summer-time range, the
system time configured is
“date-time”.
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 1:30 2008/1/1
System time configured: 23:30:00 zone-time Mon
12/31/2007
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 3:00 2008/1/1
System time configured: 03:00:00 ss Tue
01/01/2008
Enabling the display of copyright information
• When the display of copyright information is enabled, the copyright information appears when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port, or AUX port. The copyright information is displayed in the following
format:
**************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
**************************************************************************
• When the display of copyright information is disabled, the copyright information never appears.
Follow these steps to enable the display of copyright information:
To do… Use the command… Remarks
Enter system view system-view —
Enable the display of copyright
information
copyright-info enable
Optional
Enabled by default.
Configuring banners
Introduction to banners
Banners are prompt information that the system displays when users are connected to the device, perform
login authentication, and start interactive configuration. The administrator can set banners as needed.
At present, the system supports the following types of banners.
• shell banner—Also called session banner, displayed when a non TTY Modem user enters user view.