H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 51)

36
Figure 14 Configuration page
Configuring scheme authentication for telnet login
Configuration prerequisites
You have logged in to the SecBlade card.
By default, you can log in to the SecBlade card through the console port without authentication and have
user privilege level 3 after login. For information about logging in to the SecBlade card with the default
configuration, see “ Configuration requirements .”
Configuration procedure
Follow these steps to configure scheme authentication for telnet login
To do… Use the command… Remarks
Enter system view system-view —
Enable telnet telnet server enable
Required
By default, the telnet service is
disabled.
Enter one or multiple VTY user
interface views user-interface vty
first-number [ last-number ]
—
Specify the scheme authentication
mode
authentication-mode scheme
Required
By default, local authentication is
adopted.
Exit to system view quit —
Configure
the
authentic
ation
mode
Enter the default ISP
domain view
domain domain-name
Optional
By default, the AAA scheme is local.
If you specify the local AAA scheme,
perform the configuration concerning
local user as well.
Specify the AAA
scheme to be applied to
the domain
authentication default { local
| none }
Exit to system view quit