H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 280)

265
content
This field provides the content of the system information.
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center:
Task Remarks
Outputting system information to the console Optional
Outputting system information to a monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the web interface Optional
Saving system information to a log file Optional
Managing security logs files Optional
Configuring synchronous information output Optional
Disabling a port from generating link up/down logging information Optional
Outputting system information to the console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number info-center channel channel-number
name channel-name
Optional
See
Table 19 for default channel
names.
Configure the channel
through which system
information can be output
to the console
info-center console channel
{ channel-number | channel-name }
Optional
By default, system information is output
to the console through channel 0
(known as console).
Configure the output rules
of system information
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
Optional
See “
Default output rules of system
information .”