H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 43)

28
To do… Use the command… Remarks
Configure the authentication mode
as local password authentication
authentication-mode password
Required
By default, you can log in to the
SecBlade card through the console
port without authentication and
have user privilege level 3 after
login.
Set the local password
set authentication password
{ cipher | simple } password
Required
By default, no local password is
set.
Configure common settings for
console login
—
Optional
See “
Configuring common settings
for console login (optional) .”
When you log in to the SecBlade card through the console port after configuration, you are prompted to
enter a login password. A prompt such as appears after you input the password and press Enter,
as shown in Figure 10 .
Figure 10 Configuration page
Configuring scheme authentication for console login
Configuration prerequisites
You have logged in to the SecBlade card.
By default, you can log in to the SecBlade card through the console port without authentication and have
user privilege level 3 after login. For information about logging in to the SecBlade card with the default
configuration, see “ Configuration requirements .”
Configuration procedure
Follow these steps to configure scheme authentication for console login:
To do… Use the command… Remarks
Enter system view system-view —