H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 199)

184
Figure 54 Network diagram for scheduled task configuration
Configuration procedure
# Enter system view.
system-view
# Create scheduled task pc1, and enter its view.
[SecBlade] job pc1
# Configure the task to be executed in the view of GigabitEthernet 0/2.
[SecBlade-job-pc1] view GigabitEthernet 0/2
# Configure the Secblade to start GigabitEthernet 0/2 at 8:00 on working days every week.
[SecBlade-job-pc1] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown
# Configure the Secblade to shut down GigabitEthernet 0/2 at 18:00 on working days every week.
[SecBlade-job-pc1] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown
[SecBlade-job-pc1] quit
# Create scheduled task pc2, and enter its view.
[SecBlade] job pc2
# Configure the task to be executed in the view of GigabitEthernet 0/3.
[SecBlade-job-pc2] view GigabitEthernet 0/3
# Configure the Secblade to start GigabitEthernet 0/3 at 8:00 on working days every week.
[SecBlade-job-pc2] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown
# Configure the Secblade to shut down GigabitEthernet 0/3 at 18:00 on working days every week.
[SecBlade-job-pc2] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown
[SecBlade-job-pc2] quit
# Create scheduled task pc3, and enter its view.
[SecBlade] job pc3
# Configure the task to be executed in the view of GigabitEthernet 0/4.
[SecBlade-job-pc3] view GigabitEthernet 0/4
# Configure the Secblade to start GigabitEthernet 0/4 at 8:00 on working days every week.