H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 282)

267
To do… Use the command… Remarks
Configure the output rules of
the system information
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap { level
severity | state state } * ] *
Optional
See “
Default output rules of system
information .”
Configure the format of the
time stamp info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
By default, the time stamp format for
log, trap and debugging information is
date.
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do… Use the command… Remarks
Enable the monitoring of system
information on a monitor terminal terminal monitor
Required
Enabled on the console and disabled on the
monitor terminal by default.
Enable the display of debugging
information on a monitor terminal terminal debugging Required
Disabled by default
Enable the display of log
information on a monitor terminal terminal logging Optional
Enabled by default
Enable the display of trap
information on a monitor terminal terminal trapping Optional
Enabled by default
Outputting system information to a log host
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
See
Table 19 for default channel names.
Configure the output rules of the
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } *
| trap { level severity | state
state } * ] *
Optional
See “
Default output rules of system
information .”