H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 265)

250
To do… Use the command… Remarks
Delete the specified patches from
the memory patch area
patch delete patch-number Required
Displaying and maintaining software upgrade
To do… Use the command… Remarks
Display information about the boot
file (centralized device)
display boot-loader Available in any view
Display the patch information display patch information Available in any view
Software upgrade configuration examples
Scheduled upgrade configuration example
Network requirement
• As shown in Figure 77 , the current software version is soft-version1 for SecBlade. Upgrade the
software version of the device to soft-version2 and configuration file to new-config at a time when
few services are processed (for example, at 3 am) through remote operations.
• The latest application soft-version2.bin and the latest configuration file new-config.cfg are both
saved in the aaa directory of the FTP server.
• The IP address of SecBlade is 1.1.1.1/24, the IP address of the FTP server is 2.2.2.2/24, and
SecBlade and FTP server can reach each other.
• A user can log in to SecBlade via Telnet, and the user and SecBlade can reach each other.
Figure 77 Network diagram for scheduled upgrade
Configuration procedure
1. Configuration on the FTP server (Configurations may vary with different types of servers)