H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 42)

27
To do… Use the command… Remarks
Specify the none authentication
mode
authentication-mode none
Required
By default, you can log in to the
SecBlade card through the console
port without authentication, and
have user privilege level 3 after
login.
Configure common settings for
console login
—
Optional
See “
Configuring common settings
for console login (optional) .”
After the configuration, the next time you log in to the SecBlade card through the console port, you are
prompted to press enter. A prompt such as appears after you press Enter, as shown in
Figure 9 .
Figure 9 Configuration page
Configuring password authentication for console login
Configuration prerequisites
You have logged in to the SecBlade card.
By default, you can log in to the SecBlade card through the console port without authentication and have
user privilege level 3 after login. For information about logging in to the SecBlade card with the default
configuration, see “ Configuration requirements .”
Configuration procedure
Follow these steps to configure password authentication for console login:
To do… Use the command… Remarks
Enter system view system-view —
Enter console user interface view
user-interface console first-number
[ last-number ]
—