H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 255)

240
To do… Use the command… Remarks
Restore a startup configuration file
to be used at the next startup restore startup-configuration from
src-addr src-filename Required
Available in user view
NOTE:
•
Before restoring a configuration file, ensure that the server is reachable, the server is enabled with TFTP
service, and the client has read and write permission.
• After execution of the command, use the display startup command (in user view) to verify that the
filename of the configuration file to be used at the next system startup is the same with that specified by
the filename argument.
Displaying and maintaining a configuration file
To do… Use the command… Remarks
Display the information about
configuration rollback
display archive configuration Available in any view
Display the current configuration of
the device
display current-configuration
[ [ configuration [ configuration ] |
interface [ interface-type ]
[ interface-number ] |
[ by-linenum ] [ | { begin | exclude
| include } regular-expression ] ]
Available in any view
Display the factory defaults of the
device
display default-configuration Available in any view
Display the running configuration
file saved on the storage medium
of the device
display saved-configuration
[ by-linenum ]
Available in any view
Display the configuration files used
at this and the next system startup
display startup Available in any view
Display the valid configuration
under the current view
display this [ by-linenum ] Available in any view