H3C Technologies H3C SecBlade IPS Cards - Manual (Page 85)

12-2
Task Description
Activating Configurations
Required
Activate the configuration of an action and action set.
z The system has Class A and Class B configurations. Class A
configurations take effect immediately, while Class B configurations
must be activated to take effect.
z The Activate button is present on all pages with Class B
configurations. Clicking the button will activate all Class B
configurations. You are recommended to complete all Class
B configurations before clicking the Activate button.
Creating a Block Action
Select System Management > Action Management > Block Actions in the navigation tree to enter
the block action list displaying page, as shown in Figure 12-1 . Click Add to enter the action
configuration page, where the action type is Block by default, as shown in Figure 12-2 .
Figure 12-1 Block action list
Figure 12-2 Block action configuration page
Table 12-2 describes the configuration items for creating a block action.