H3C Technologies H3C SecBlade IPS Cards - Manual (Page 187)

18-8
Configuring rules for a policy
The Rule Configuration area of Figure 18-7 shows all rules of the policy. On the rule list, you can
modify a rule.
z Click Add to add a rule to the policy, and the rule will appear on the rule list, as shown in Figure
18-8 .
z Click the icon, and the Rule page appears, as shown in Figure 18-9 .
The Rule Configuration area is different from the Rule page as follows:
z You can add or delete time table-action set associations for a service on the Rule page, but you
cannot do that in the Rule Configuration area.
z With the Rate Limit action set selected, you can set upstream/downstream bandwidth, bandwidth
per connection, connection establishment rate, and maximum connection number on the Rule
page, but you can configure only the upstream/downstream bandwidth in the Rule Configuration
area.
z You can modify the service to be matched and create new time tables in the Rule Configuration
area, but you cannot do that on the Rule page.
Figure 18-8 Rule configuration
Figure 18-9 Advanced bandwidth rule configuration
Table 18-6 shows the rule configuration items.