H3C Technologies H3C SecBlade IPS Cards - Manual (Page 183)

18-4
Item Remarks
Description Configure the protocol description, which helps you to remember different protocols.
Type Specify the transport layer protocol type for the protocol, which can be TCP or UDP.
Ports
Specify the TCP or UDP ports used by the protocol.
You can specify up to eight port ranges, each of which can contain up to 32 ports.
Return to Bandwidth management configuration task list .
Configuring Services
Select Bandwidth Management > Service Management from the navigation tree to enter the page
displaying all service information, as shown in Figure 18-3 .
Figure 18-3 Service management
z Select Service A in the service tree and drag it under Service B. In this way, Service A is appended
to Service B, and Service A becomes a child service of Service B.
z In the service tree, select a service to be configured as the father service of the service to be added.
Then click Add to enter the page for adding and configuring a service, as shown in Figure 18-4 .
z To delete a user-defined service from the service tree, select the service and click Delete. The
system-defined services cannot be deleted.
z Select a protocol in the service tree and then you can view and modify detailed information of the
service on the right of the page. Click Add to enter the Match Rule Management page for the
service, as shown in Figure 18-5 .