H3C Technologies H3C SecBlade IPS Cards - Manual (Page 123)

14-10
Item Description
IP addresses
External
Zone
Excluded IP
addresses
Specify the IP addresses to apply the policy to in the external zone. The policy
will apply to all IP addresses that are in the IP addresses list but not in the
Excluded IP addressed list.
The excluded IP addresses must be included on the IP Addresses list.
If you leave the lists blank, the policy applies to all IP addresses in the external
zone.
z On a T1000 series IPS device, you can configure up to 10 IP addresses for
the IP Addresses list and Excluded IP addresses list respectively.
z On a T200 series IPS device, you can configure up to 256 IP addresses for
the IP Addresses list and Excluded IP addresses list respectively.
Return to IPS configuration task list .
Configuring IPS Policy Fast Application
Select IPS > Fast Application from the navigation tree to enter the IPS policy fast application page, as
shown in Figure 14-10 .
Figure 14-10 IPS policy fast application
Table 14-6 describes the configuration items for IPS policy fast application.
Table 14-6 Configuration items for IPS policy fast application
Item Description
Name
Enter a name for the IPS policy
The policy rules are copied from default IPS policy Attach Policy.
Description Enter a description for the policy, for example, the purpose of the policy.