H3C Technologies H3C SecBlade IPS Cards - Manual (Page 213)

22-4
Item Description
Action Specify the action against the attack, which can be Alert or Block.
Chart Type
Select the type of the chart displaying the statistics, which can be:
z Piechart: Helps you to see the relative size of each attack.
z Histogram: Helps you to see the absolute size of each attack.
Segment
Specify the segment where attacks occur.
Select System Management > Network Management > Segment Configuration to
configure the segments available for selection.
Time Range
Specify the time range of the traffic statistics report to be viewed, which can be:
z Last hour: Displays the statistics in the last full hour. For example, suppose it is 16:25
now, the statistics between 15:00 and 16:00 today are displayed.
z Last day: Displays the statistics of the last day. For example, suppose it is 2008-08-08
today, the statistics between 2008-08-07 00:00 and 2008-08-08 00:00 are displayed.
z Last week: Displays the statistics of the last week. For example, suppose it is
Wednesday today, the statistics between the last Wednesday and the current Tuesday
are displayed.
z Customize: Displays the traffic statistics of the specified time range. You need to
manually set the start time and the end time.
After setting the query conditions, click Query and the report information conforming to the set query
conditions is displayed on the lower part of the page, as shown in Figure 22-4 .
Figure 22-4 Top N attack report query results
Return to Functions of the attack report module .