H3C Technologies H3C SecBlade IPS Cards - Manual (Page 64)

5-4
Executing a Ping Operation
Select System Management > Network Management > Management Interface from the navigation
tree to enter the page as shown in Figure 5-2 . You can perform ping operations on the Management
Interface Configuration page.
Type a destination IP address in the Ping text box, and then click Test to start a ping operation. The
result of the ping operation is displayed below the text box, as shown in Figure 5-3 .
Figure 5-3 Ping operation result
Creating a Static Route
Select System Management > Network Management > Management Interface from the navigation
tree to enter the page as shown in Figure 5-2 . On the Static Route tab, all static routes are listed. Click
Add to enter the Add Static Route page as shown in Figure 5-4 .
Figure 5-4 Add a static route