H3C Technologies H3C SecBlade IPS Cards - Manual (Page 66)

6-1
6
Interface Configuration
Overview
The interface configuration module allows you to manage device interface attributes, including the
interface type, up/down status, transmission rate, and duplex mode.
Configuring and Displaying Interface Properties
Select System Management > Network Management > Interface Configuration from the navigation
tree to enter the page as shown in Figure 6-1 .
Figure 6-1 Interface priorities configuration page
The interface status, attributes, and statistics are displayed on the page. Table 6-1 describes the
interface priorities configuration items.
Table 6-1 Interface priorities configuration items
Item Description
Interface This field displays the interface type and number.
Connection Status This field displays whether the interface is connected to another network device.
Interface Type
Configure the medium type of the interface, which can be:
z Copper—The interface is an electrical interface and is connected to a twisted pair.
z Fiber—The interface is an optical interface and is connected to an optical fiber.
Support for the medium types depends on your device model.
Management Status Configure the up/down state of the interface.
Rate
Configure the interface transmission rate, which can be
z 1000M—1000 Mbit/s
z 100M—100 Mbit/s
z 10M—10 Mbit/s
z Auto—The transmission rate is automatically negotiated.