System reboot, System reboot overview, Rebooting the system – H3C Technologies H3C SecBlade IPS Cards User Manual
Page 55
3-27
z
Select 0 from the Segment No drop-down list.
z
Select zone1 from the Internal Zone drop-down list, and zone2 from the External Zone
drop-down list.
z
Select Ten-GigabitEthernet2/0/1 from the Internal Interface drop-down list.
z
Click Apply.
After the above configuration, you need to apply the security policies (such as URL filtering policies,
anti-virus policy) on segment 0, and then you can detect and control the traffic on Device.
System Reboot
System Reboot Overview
The system reboot module allows you to reboot the device through the web interface. After the system
reboots, you need to re-log in to the Web interface.
Rebooting the system
Select System Management > Device Management > System Reboot from the navigation tree to
enter the system reboot configuration page, as shown in
.
Figure 3-26 System reboot page
You need to save the configurations to the disk before you reboot the device; otherwise, unsaved
configuration may be lost after reboot.
Click Reboot and confirm your action.