H3C Technologies H3C SecBlade IPS Cards - Manual (Page 185)

18-6
Table 18-4 describes the match rule configuration items.
Table 18-4 Match rule configuration items
Item Remarks
Service Name Name of the service to be configured
Protocol Name
Set the network protocol.
Select the IP protocol, and then the protocol drop-down list appears. Select a specific
network protocol in the drop-down list.
Server IP
Set an IP address and mask to determine the IP address or network segment of the server
or host.
z If you set the server IP to 192.168.1.1/24, all servers or hosts on the network segment
192.168.1.1/24 are specified.
z If you do not set the server IP, all servers or hosts are specified.
Initiator
Set the initiator of protocol packets, which can be:
z Internal zone: Indicates that protocol packets are initiated by the internal zone.
z External zone: Indicates that protocol packets are initiated by the external zone.
z Both: indicates that protocol packets are initiated by the internal zone or external zone.
Return to Bandwidth management configuration task list .
Creating and Applying a Bandwidth Management Policy
Select Bandwidth Management > Bandwidth Policies from the navigation tree to enter the bandwidth
management policy displaying page, as shown in Figure 18-6 . Click Add to enter the Create a Policy
Application page, as shown in Figure 18-7 .
Figure 18-6 Policy management