H3C Technologies H3C SecBlade IPS Cards - Manual (Page 127)

14-14
Figure 14-16 Configure a policy application
z Select segment 0.
z Select RD as the policy.
z Select the Internal zone to External zone for the Direction field.
z Click Apply.
# Activate the configurations.
z After the above configurations, the IPS policy application list appears, as shown in Figure 14-17 .
Click Activate and confirm your action.
Figure 14-17 Activate configurations
Configuration Guidelines
When performing IPS configurations, note that:
Step1 You cannot delete an IPS policy that has been applied to a segment.
Step2 You cannot delete the system default IPS policy and rules.