H3C Technologies H3C SecBlade IPS Cards - Manual (Page 14)

1-1
1
Web Overview
Overview
Hangzhou H3C Technologies Co., Ltd. (hereinafter referred to as H3C) provides the Web-based
network management function for the Intrusion Prevention System (IPS) of H3C to facilitate the
operations and maintenance on the IPS devices. Through this function, the administrator can visually
manage and maintain the IPS devices through the Web-based configuration interfaces.
Figure 1-1 shows a Web-based network management operating system.
Figure 1-1 Web-based network management operating environment
Logging In to the Web Interface
The device is provided with the default Web login information .You can use the default information to log
in to the Web interface. The default Web login information is:
z Username: admin
z Password: admin
z IP address of the device: 192.168.1.1
To log in to the device through the Web interface, follow these steps:
Step1 Connect the device and PC
Connect the default management port meth 0/0 of the device to the PC using a crossover Ethernet
cable. For the IPS cards with silkscreen LSWM1IPS10 for S5800 and S5820X series switches, the
default management port is meth 0/0. For other models of IPS cards, the default management port is
meth 0/2.
z If the IPS device provides two management ports, you can use only one to manage the device at a
time.
z By default, a management port with the smallest ID is the default management port, and it is
assigned IP address 192.168.1.1/24. To make a management port with a larger ID the default
management port, remove the IP address of the original default management port and assign an IP
address to the management port that you want to configure as the default one.