H3C Technologies H3C SecBlade IPS Cards - Manual (Page 208)

21-4
Return to Traffic statistics report configuration task list .
Configuring Top N Reports
Select Report > Traffic Statistics Report > Traffic N Report Configuration to enter the page shown
in Figure 21-4 . You can set the top N report on the upper part of the page and query existing top N
reports by type on the lower part of the page.
Figure 21-4 Top N report configuration
Table 21-5 describes the top N report configuration items.
Table 21-5 Top N report configuration items
Item Remarks
Report Type
Specify the type of the top N report to be added, which can be:
z Top service report: service-based top N report
z Top protocol report: protocol-based top N report
Report Name Set the name for the top N report.
Segments
Specify the segments whose traffic statistics are to be collected by the top N report.
Select System Management > Network Management > Segment Configuration to
configure the segments available for selection.
Direction
Specify the direction whose traffic statistics are to be collected by the top N report, which can
be:
z Inbound
z Outbound
z Bidirectional
Return to Top N report configuration task list .
Querying Top N Reports
Select Report > Traffic Statistics Report > Traffic N Report to enter the page shown in Figure 21-5 .