H3C Technologies H3C SecBlade IPS Cards - Manual (Page 54)

3-26
Figure 3-23 Add a security zone
z Type zone1 as the name.
z Add interface GigabitEthernet 4/0/1.
z Click Apply.
# Add an external security zone.
z Click Add.
z Type zone2 as the name.
z Add interface GigabitEthernet 4/0/2.
z Click Apply.
# Add segment 0.
z Select System Management > Network Management > Segment Configuration, and click Add
Segment, as shown in Figure 3-24 . Perform the following operations on the Add Segment page,
as shown in Figure 3-25 .
Figure 3-24 Segment configuration
Figure 3-25 Add a segment