H3C Technologies H3C SecBlade IPS Cards - Manual (Page 137)

15-9
Figure 15-10 Default URL rule area
Applying a policy
Figure 15-11 shows the policy application configuration page.
Figure 15-11 Policy application page
Table 15-7 describes the policy application configuration items.
Table 15-7 Policy application configuration items
Item Description
Segment
Select the ID of the segment to which the URL filtering policy is applied.
After you selecting a segment, the internal zone and external zone of this segment are
displayed next to the drop-down list. Available segments are those configured on the page you
enter by selecting System Management > Network Management > Segment Configuration.
Direction
This field displays that the URL filtering policy is applied from the internal zone to the external
zone.
IP addresses
Excluded IP
addresses
Specify the IP addresses to apply the policy to in the internal zone. The policy will apply to all IP
addresses that are in the IP addresses list and not in the Excluded IP addresses list.
The excluded IP addresses must be included on the IP addresses list.
If you leave the lists blank, the policy applies to the whole internal zone.
z You can configure up to 10 internal zone IP addresses and 10 internal zone excluded IP
addresses for the T1000 series IPS.
z You can configure up to 256 internal zone IP addresses and 256 internal zone excluded IP
addresses for the T200 series IPS.