H3C Technologies H3C SecBlade IPS Cards - Manual (Page 51)

3-23
Item Description
Authentication Password
Encryption Password
Set the authentication password and encryption password for the OAA client.
Three security levels are available: no authentication no privacy, authentication
without privacy, and authentication with privacy. The security level you set must be
the same with the related configuration of the SNMP on the OAA server.
The device supports MD5 authentication mode and DES privacy mode. If
authentication and encryption are needed, the authentication mode and privacy
mode on the OAA server must be MD5 and DES respectively.
OAA Server IP Set the IP address for the OAA server.
VLAN ID Specify the VLAN to which the internal interface belongs.
IP Address Set the IP address for the internal interface.
Subnet Mask Set the subnet mask for the internal interface.
After configuring the OAA client, click Test Connectiv to test the connectivity between the OAA client
and the server.
After configuring the parameters on the OAA page, click Test Connectiv to test the connectivity
between the OAA client and the server. After you confirm that the test is successful, click Apply to
submit your configuration.
OAA Configuration Example
Network requirements
z The intranet is interconnected to the Internet through Device that acts as the ACFP server.
z IPS is connected to Device. With the OAA configurations, IPS can detect and control the traffic on
Device.