H3C Technologies H3C SecBlade IPS Cards - Manual (Page 50)

3-22
To better support the Client/Server collaboration mode and granularly and flexibly set different rules, the
collaboration content is divided into four parts: ACFP server information, ACFP client information, ACFP
collaboration policy and ACFP collaboration rules. These four parts of information are saved in the
ACFP server.
An ACFP server supports multiple ACFP clients. Therefore, ACFP client information, ACFP
collaboration policy, and ACFP collaboration rules are organized in the form of tables.
ACFP server information is generated by the ACFP server itself. ACFP client information, ACFP
collaboration policy, and ACFP collaboration rules are generated on the ACFP client and sent to the
ACFP server through the collaboration MIB or collaboration protocol.
Configuring OAA Client
Select System Management > Device Management > OAA Configuration to enter the OAA
configuration page, as shown in Figure 3-19 .
Figure 3-19 OAA configuration
Table 3-14 describes OAA client configuration items.
Table 3-14 OAA client configuration items
Item Description
ACFP Client
Specify whether to enable ACFP client.
The ACFP client is enabled by default.
Username
Set the username of the OAA client. The username should be the same with the
related configuration of the SNMP on the OAA server.