H3C Technologies H3C SecBlade IPS Cards - Manual (Page 207)

21-3
Querying the Traffic Statistics Reports
Select Report > Traffic Statistics Report > Traffic Statistics Report to enter the page shown in
Figure 21-2 .
Figure 21-2 Query the traffic statistics reports
Table 21-4 describes the items of querying traffic statistics reports.
Table 21-4 Items of querying traffic statistics reports
Item Remarks
Report Type
Specify the type of the traffic statistics report to be queried, which can be:
z service report
z protocol report
Report
Specify the service/protocol report to be viewed.
z When the Report Type is service report, all the created service reports are displayed in
the drop-down list.
z When the Report Type is protocol report, all the created protocol reports are displayed
in the drop-down list.
Data Types
Specify the types of the data to be viewed, which can be:
z Average bandwidth
z Peak bandwidth
Time Range
Specify the time range of the traffic statistics report to be viewed, which can be:
z Last day: Displays the traffic statistics of the last day.
z Customize: Displays the traffic statistics of the specified time range. You need to
manually set the start time and the end time.
After setting the query conditions, click Query and the report information conforming to the set query
conditions is displayed on the lower part of the page, as shown in Figure 21-3 .
Figure 21-3 Traffic statistics report query results