H3C Technologies H3C SecBlade IPS Cards - Manual (Page 133)

15-5
Figure 15-5 Add a policy application (category-based URL filtering unsupported)
Table 15-3 describes the policy application configuration items.
Table 15-3 Policy application configuration items
Item Description
Name Type the name for the URL filtering policy.
Description Type a description for the policy, for example, the purpose of the policy.
Category-Based URL
Rule
Configure a category-based URL filtering rule.
Click the expansion button next to Category-Based URL Rule to expand the
configuration field, as shown in
Figure 15-6 . For more information about
configuration items, see Table 15-4 .
User-Defined URL Rule
Configure a user-defined URL rule.
Click the expansion button next to User-Defined URL Rule to expand the
configuration field, as shown in
Figure 15-7 . For more information about
configuration items, see Table 15-5 .
Default URL Rule
Configure a default URL rule for the HTTP requests that match neither the
category-based URL rules nor the user-defined URL rules.
Click the expansion button next to Default URL Rule to expand the configuration
field, as shown in
Figure 15-10 . For more information about configuration items,
see Table 15-5 .
Apply Policy to
Specify the range to which the URL filtering policy is applied.
This field displays the segment the policy is applied to and the IP addresses and
excluded IP addresses in the internal zone. Click Add to enter the policy
application configuration page, as shown in
Figure 15-11 . For more information
about configuration items, see Table 15-7 .
Configuring a category-based URL rule
On the category-based URL rule configuration page shown in Figure 15-6 , all the URL categories that a
URL category server can identify are displayed in groups on the left. Click a category group, and all
categories of the group and the corresponding action parameters are displayed on the right.