H3C Technologies H3C SecBlade IPS Cards - Manual (Page 178)

17-21
Figure 17-20 DDoS policy application
eth0/0 eth0/1
z Select Segment 0.
z Select the default DDoS policy DDoS Policy.
z Select Internal zone as the protected zone.
z Enter the IP address 192.168.10.100/32 and click Add to add it to the protected IP list.
z Click Apply.
# Activate the DDoS policy application.
z After the above configuration, the policy application list page appears, as shown in Figure 17-21 .
Click Activate. A dialog box pops up.
z Click OK on the dialog box to activate the policy application.
Figure 17-21 Activate the policy application
# Start traffic learning.
z Click the Start button of Traffic Learning of the policy application to start traffic learning, as shown
in Figure 17-22 .
z Traffic learning will last for 2 hours (the default interval), and creation of detection rules will
complete when traffic learning ends.