H3C Technologies H3C SecBlade IPS Cards - Manual (Page 75)

8-2
Figure 8-1 Segment configuration on a chassis
Figure 8-2 Create a segment on a chassis
Table 8-2 describes the configuration items of creating a segment.
Table 8-2 Configuration items of creating a segment on a chassis
Item Description
Segment No Specifies the segment ID.
Internal Zone
Specifies the internal zone of the segment. You can select one of the existing security
zones only.
External Zone
Specifies the external zone of the segment. You can select one of the existing security
zones only.
Return to Segment configuration task list .
On a card
Select System Management > Network Management > Segment Configuration from the navigation
tree to enter the page as shown in Figure 8-3 . Then click Add Segment to enter the page as shown in
Figure 8-4 .