H3C Technologies H3C SecBlade IPS Cards - Manual (Page 35)

3-7
Table 3-7 System time configuration items
Item Description
Local Date and Time
Local Date
Local Time
Set the system date and time manually.
If you do not select the Time Source check box, the Local Date
and Local Time fields display the current system time, which
changes in real time; if you configure the SNTP server as the time
source, and the time synchronization is successful, these fields
display the synchronized time.
SNTP Server
Primary SNTP Server
Secondary SNTP Server
Time
Source
Synchronization Interval
Enable clock automatic synchronization with an SNTP server,
and specify the IP address of the SNTP server and the
synchronization interval.
Time Zone
Set the time zone to which the system belongs.
The local time zone is based on Greenwich Mean Time (GMT).
After your configuration takes effect, the system time, log and
debugging information use the local time adjusted according to
the time zone.
System Monitoring
System Monitoring Overview
The system monitoring module helps you view and set system thresholds, including CPU usage
threshold, memory usage threshold, hardware usage threshold, CPU temperature upper and lower
limits, and main board temperature upper and lower limits.
Configuring System Monitoring
Select System Management > Device Management > System Monitoring from the navigation tree,
and enter the page as shown in Figure 3-4 .
Figure 3-4 System monitoring
Table 3-8 describes system monitoring configuration items.