H3C Technologies H3C SecBlade IPS Cards - Manual (Page 41)

3-13
Figure 3-9 Manual upgrade
Table 3-10 describes configuration items of manual upgrade.
Table 3-10 Configuration items of manual upgrade
Item Description
Signature Type Set the type of the signature database to be upgraded.
Protocol Specify the protocol (HTTP or TFTP) to be used to download the upgrade database.
Upgrade Package
Location
Set the directory on the local host to save the upgrade package and its file name, for
example, 192.168.1.16/abc.
The directory of the file can include letters, digits, and underline (_), and cannot include
any Chinese character.
After configuring the parameters, click OK to upgrade the signature database. The Manual Upgrade
tab page displays the upgrade progress, as shown in Figure 3-10 .
Figure 3-10 Upgrade progress
Auto Upgrade
To realize the auto grade of the signature database, you must select System Management > Network
Management > Management Interface from the navigation tree and then configure DNS servers. For
detailed configuration, refer to Network Management Configuration of this manual.
Select System Management > Device Management > Signature Upgrade from the navigation tree
to enter the signature database upgrade page. You can set related parameters for the auto upgrade in
the Auto Upgrade tab, as shown in Figure 3-11 .