H3C Technologies H3C SecBlade IPS Cards - Manual (Page 53)

3-25
Figure 3-21 OAA configuration
z Type v3user as the username.
z Type 192.168.1.1 as the IP address of the OAA server.
z Type 100 as VLAN ID.
z Type 192.168.1.2 as the IP address.
z Type 255.255.255.0 as subnet mask.
z Click Apply.
# Test the connectivity.
z Click Test Connectiv on OAA configuration page.
z The system prompts that the connectivity test succeeded.
# Add an internal security zone.
z Select System Management > Network Management > Security Zone, and click Add, as shown
in Figure 3-22 . Perform the following operations on the Add Security Zone page, as shown in
Figure 3-23 .
Figure 3-22 Security zone