H3C Technologies H3C SecBlade IPS Cards - Manual (Page 146)

15-18
z Add IP address 10.0.0.0/8 to the IP addresses list.
z Add IP address 10.0.0.1/32 to the Excluded IP addresses list.
z Click Apply.
z In you want to abort the configuration, click Cancel to close the Add Policy Application page.
z After the preceding configurations are complete, the page shown in Figure 15-24 appears,
displaying the policy application configuration. Click Apply
Figure 15-24 Apply the URL filtering policy
# Activate the configurations.
z After the preceding configurations are complete, the global URL filtering parameter configuration
page appears, as shown in Figure 15-25 . Click Activate and confirm your action.
Figure 15-25 Activate configurations