H3C Technologies H3C SecBlade IPS Cards - Manual (Page 69)

7-2
Task Description
Activating
Configurations
Required
Activate all Class B configurations.
z There are two categories of configurations in the system: Class A and Class B.
Class A configurations take effect immediately, while Class B configurations must
be activated to take effect.
z The Activate button is present on all pages with Class B configurations. Clicking
the button on any page will activate all Class B configurations. You are
recommended to complete all Class B configurations before clicking the Activate
button.
Creating a Security Zone
For interfaces without VLAN configuration
Select System Management > Network Management > Security Zone from the navigation tree to
enter the page as shown in Figure 7-2 . Click Add to enter the page as shown in Figure 7-3 .
Figure 7-2 Security zone configuration page (for interfaces without VLAN configuration)
Figure 7-3 Create a security zone for interfaces without VLAN configuration
Table 7-2 describes the configuration items of creating a security zone.