beautypg.com

Network requirements – H3C Technologies H3C MSR 5600 User Manual

Page 97

background image

84

Clock status: synchronized

Clock stratum: 3

System peer: 3.0.1.33

Local mode: sym_passive

Reference clock ID: 3.0.1.33

Leap indicator: 00

Clock jitter: 0.000916 s

Stability: 0.000 pps

Clock precision: 2^-17

Root delay: 0.00609 ms

Root dispersion: 1.95859 ms

Reference time: 83aec681.deb6d3e5 Sun, Jan 4 1970 5:56:17.869

# Display IPv4 NTP association information for Device B.

[DeviceB] display ntp-service sessions

source reference stra reach poll now offset delay disper

********************************************************************************

[25]3.0.1.31 127.127.1.0 3 28 64 - 0.0000 0.0000 4000.0

[1234]3.0.1.33 127.127.1.0 2 62 64 34 0.4251 6.0882 1392.1

Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.

Total sessions: 2

The output shows that an association has been set up between Device B and Device A, and Device
B and Device C

IPv6 NTP symmetric active/passive mode
configuration example

Network requirements

As shown in

Figure 32

, Device C has a clock more accurate than Device A. Set the local clock of

Device A as a reference source, with the stratum level 3.

Set the local clock Device C as a reference source, with the stratum level 2.

Configure Device B to operate in client mode and specify Device A as the IPv6 NTP server of Device
B.

Configure Device C to operate in symmetric-active mode and specify Device B as the IPv6 passive
peer of Device C.

This manual is related to the following products: