H3C Technologies H3C MSR 5600 - Manual (Page 179)

166
Operation Description XML example
edit-config:
test-option
Determines whether to issue a
configuration item in the
edit-configure operation. The
test-option element has one of
the following values:
• test-then-set—Performs a
validation test before
attempting to set. If the
validation test fails, the
edit-config operation is not
performed. This is the default
test-option value.
• set—Directly performs the
set operation without the
validation test.
• test-only—Performs only a
validation test without
attempting to set. If the
validation test succeeds, a
successful message is
returned. Otherwise, an
error message is returned.
To issue the configuration for an interface for test
purposes:
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
test-only
xmlns:xc="urn:ietf:params:xml:ns:netconf
:base:1.0">
xmlns="http://www.h3c.com/netconf/config
:1.0">
262
222
100
1
action
Issues actions that are not for
configuring data, for example,
reset action.
To clear statistics information for all interfaces:
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
xmlns="http://www.h3c.com/netconf/action
:1.0">