H3C Technologies H3C MSR 5600 - Manual (Page 24)

11
Step Command Remarks
2. Enable the NQA server. nqa server enable
By default, the NQA server
is disabled.
3. Configure a TCP or UDP
listening service.
• TCP listening service:
nqa server tcp-connect ip-address
port-number [ tos tos ] [ vpn-instance
vpn-instance-name ]
• UDP listening service:
nqa server udp-echo ip-address
port-number [ tos tos ] [ vpn-instance
vpn-instance-name ]
You can specify the ToS
value in the IP packet
header of NQA probe
packets. The default ToS
value is 0.
Enabling the NQA client
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the NQA client. nqa agent enable By default, the NQA client is enabled.
Configuring NQA operations on the NQA client
NQA operation configuration task list
Tasks at a glance
(Required.) Configure at least one of the NQA operations:
• Configuring the ICMP echo operation
• Configuring the DHCP operation
• Configuring the DNS operation
• Configuring the FTP operation
• Configuring the HTTP operation
• Configuring the UDP jitter operation
• Configuring the SNMP operation
• Configuring the TCP operation
• Configuring the UDP echo operation
• Configuring the voice operation
• Configuring the DLSw operation
• Configuring the path jitter operation
(Optional.) Configuring optional parameters for the NQA operation
(Optional.) Configuring the collaboration function
(Optional.) Configuring threshold monitoring
(Optional.) Configuring the NQA statistics collection function
(Optional.) Configuring the saving of NQA history records