H3C Technologies H3C MSR 5600 - Manual (Page 166)

153
# Retrieve data in the Name column with the ifIndex value not less than 5000 in the Interfaces table
under the Ifmgr module.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:nc="http://www.h3c.com/netconf/base:1.0">
Verifying the configuration
If the client receives the following text, the operation is successful.
xmlns:nc="http://www.h3c.com/netconf/base:1.0" message-id="100">
7241
NULL0
7243
Register-Tunnel0
Performing CLI operations through NETCONF
You can enclose CLIs in XML messages to configure the device.